dosage
guide table
Initial dose/every 2 months: 1 L/10 m³.
Initial dose: 1 L/100 m³ .
Maintenance dose: 0.5 L/100 m³ every week.
Dosage: 1 litre per 200 to 600 metres3, as required.
Dosage: 0,75 L/ 100 m3.
Loading dose: Add 2 tablets/50 m³ to the motor pre-filter or skimmer.
Dosage: initially add 2 tablets/50 m3 in the skimmer.
Maintenance: add 1 tablet/50 m3 in the skimmer each week.
Dosage: 1 tablet/10-15 m³ every week.
Dosage: 1 tablet per cleaning cycle.
Dosage: 1 L/100 m3 every 30 days (family pools) or every 15 days (public pools).
Dosage: Initial treatment: 1.5 L/100 m3. Maintenance: 0,3 L/100 m3 once a week.
Dosage: 1 to 2 litres every 100 metres3 water, as needed.
Initial application rate (=500 ppb): 0,6 L/100 m3.
Initial application rate (=2500 ppb): 0,6 L/100 m3.
Initial dosage: 1,5 L/100 m3.
Maintenance: 0,5 L/100 m3.
Initial dosage: 20 g/m3.
Initial dosage: 1 L/100 m3.
Maintenance: 0,5 L/100 m3.
Initial dose: 0,5 L/100 m3.
Dosage: 1 L / 75 m3 of water.
Dosage: 0,5 L / 100 m3.
Loading dose: 13 g/m³.
Maintenance dose: 1 to 2 g/m³ per day.
Dosage: 1 tablet per 20 m³ of water.
Loading dose: 10 g/m³.
Maintenance dose: 1 to 2 g/m³ per day.
Loading dose: 30 g/m³.
Maintenance dose: 2 to 3 g/m³ per day.
If used for skimmer dosingOne tablet per week is needed for every 25 m³ of water.
Dosage: 1 tablet per 25-30 m³ of water.
Dosage: 1 tablet per 25-30 m³ of water.
Dosage: 4 g/m³.
Initial dose: 25 g/m³ of water.
Maintenance dose: 10-15 g/m³.
Weekly dosage per skimmer, One tablet is needed for every 10 m³ of water.
Green water recovery dosage: 1 L / 10 m³.
Maintenance dose: adjust the concentration to 30 ppm.
Green water recovery dosage: 3 L/10 m³.
Maintenance dose: adjust the concentration to 30 ppm.
Dosis para bajar 0,3 un. de pH: 10 g/m³ of water.
Dosage to lower pH by 0.1 units: 1 L/100 m³ of water.
Dosage to lower pH by 0.1 units: 2.7 L/100 m³ of water.
Dosage to raise pH by 0.3 units: 4 g/m³ of water.
Dosage to raise pH by 0.1 units: 0.5 L/100 m³ of water.
Dosage to raise pH by 0.3 units: 10 g/m³ of water.
Dosage to increase TAC by 10 ppm: 17 g/m³ of water.
Dosage to lower TAC by 10 ppm: 25 g/m³ of water.
Dosage to increase calcium hardness by 10 ppm: 15 g/m³ of water.
Dosage: 1 litre per 100 cubic metres per week.
Dosage: 1 L/100 m3 every 30 days (family pools) or every 15 days (public pools).
Dosage: Initial treatment: 1.5 L/100 m3. Maintenance: 0,3 L/100 m3 once a week.
Dosage: 1 to 2 litres every 100 metres3 water, as needed.
Loading dose: 3 L / 100 m³ of water.
Dosage with dosing device: 0.2 L/m³/day.
Dosage: 1 cartridge/50 m³ in the skimmer.
Loading dose: 2 L / 100 m³ of water.
Maintenance dose: 0.4 L/m³/week.
Dosage per 1000 litres:
PISCIMAR XIP add 10 mL every 15 days.
PISCIMAR XAP add 5 g every 2 days.
Dosage: 1 tablet/10-15 m³ every week.
Dosage:
Filter Ø 400 mm: 500 ml
Filter Ø 500 mm: 600 ml
Filter Ø 600 mm: 800 ml
Filter Ø 750 mm: 1000 ml
Dosage: 0.5L/25 m³ every 3 months.
Dosage: 2L/100 m³ in pools that continue to operate and 4L/100 m³ in pools that are shut down during the winter season.
Dosage: 0.5L/25 m³ keeps the water for 3 to 6 months.
Dosage: 25 g/m³ of water.
Dosage:
Chlorine: 1.5 g/m³ per ppm
Bromine: 0.75 g/m³ per ppm
Peroxide: add 14 g/m³ for each ppm
Dosage: 10 g/m³ of water.
Dosage: 30 g/m³ of water.
Dosage: 25 mL/10 m³.
It is important not to exceed the recommended dose!
Chlorine: 1.5 g/m³ for each ppm of chlorine to be reduced.
Bromine: 0.75 g/m³ for each ppm of bromine to be reduced.
Peroxide: 14 g/m³ per ppm of peroxide disminuir.
Initial dose: 1 L/100 m³ of water.
Dosage: 0,5 a 1 L/100 m³.
Dosage: 1 a 2,5 L/100 m³.
Use the following table for dosage:
|
Ø Filter |
Kg PM-122 |
Ø Filter |
Kg PM-122 |
|
400-600 |
1.2 |
1000- 1200 |
12 |
|
600-800 |
2.4 |
1200-1400 |
18 |
|
800-1000 |
6 |
1400-1600 |
24 |
Completely submerge the cell plates in the PM-142 CELNET for 10 to 15 minutes and rinse thoroughly with water.
Dry and readyas if it were brand new.
Recommended dose every 2 months: 1 kg/10 m³.
Initial dose/every 2 months: 1 L/10 m³.
